Smart city - Transit stop and station analytics
Count people waiting, boarding and leaving at stops and stations on the camera system your agency already runs.
What it can show
ConductVision can count people, and in a pilot it can be set up to measure the rest. It is designed to flag people past the platform edge for your team to review.
People at a stop
People waiting, by stop and by hour.
Boarding and leaving
People getting on and off, where the camera sees the doors.
Crowding
People in a platform area, by hour.
Platform edges
People past the platform edge line.
Blocked stops
Vehicles stopped in the bus stop.
Getting to the stop
How people cross the street to reach the stop.
Passenger counters
Counts at the stop do not replace the passenger counters on your vehicles.
What it does not do
ConductVision does not replace your station staff or your security team.
Pilot - How a pilot starts
A paid pilot covers one stop or one station. Your team sets the criteria before any results come in. You decide whether to roll out, change the scope or stop.
- You bring
- Recorded video from the cameras at one stop or station. A first look at your footage shows whether the camera views will work.
- We set up
- ConductVision for your camera views. A measure that is right at one camera may not be right at the next, so before results go out a ConductVision engineer measures a sample from each camera by hand to check them.
- You get
- Counts by hour and flagged clips, and a final report on whether the pilot met the criteria your team set.
Related pages
- Possible boarding helpRiders at a stop who may use a mobility device.
- Foot trafficPeople on main streets, in plazas and on trails.
- Curb managementWho uses the curb, when and for how long.
- Pedestrian safetyCrossings, yielding and where people actually cross.
- Privacy and public camerasWhat happens to street video.