Exits and aisles - Blocked exits, aisles and safety equipment between 5S audits

ConductVision is designed to flag exits, aisles, fire extinguishers, electrical panels, eyewash stations and signs left blocked or covered, for your team to review.

A plant aisle with a yellow floor line, with wire cages of parts and pallets along its edges

What it can flag

Your safety walks and 5S audits check the floor on the day they happen. ConductVision can watch for these items on the shifts in between.

Exits

An exit door or exit route with pallets, carts or other material left in the way.

Aisles

An aisle or passageway left blocked.

Fire extinguishers

A fire extinguisher left blocked or hidden behind stored material.

Electrical panels

Material left in front of an electrical panel.

Eyewash stations

An eyewash station or safety shower left blocked.

Signs

A safety sign left covered.

What OSHA's rules say about these

29 CFR 1910.37(a)(3)
Exit routes must be free and unobstructed. No materials or equipment may be placed, either permanently or temporarily, within the exit route.
29 CFR 1910.176(a)
Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard.
29 CFR 1910.157(c)(1)
The employer shall provide portable fire extinguishers and shall mount, locate and identify them so that they are readily accessible to employees without subjecting the employees to possible injury.
29 CFR 1910.303(g)(1)
Sufficient access and working space shall be provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment.
29 CFR 1910.151(c)
Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use.

Pilot - How a pilot starts

A pilot is one area of one plant. We look at footage you choose to share with us and agree with your team on what to watch for. A first look at your footage shows whether the camera views will work. Your team sets the criteria before any results come in. You decide whether to roll out, change the scope or stop.

You bring
Video from the cameras that already see the exits, aisles or panels in one area
We set up
One area, and the exits, aisles and equipment to keep clear there
You get
Flagged clips for your team to review, and a report of the results checked against the criteria your team set

ConductVision works with the camera system you already run. We do not install cameras. ConductVision runs on a computer at your site. Full recordings never leave your network, and short clips leave it only as your statement of work sets out. Faces can be blurred, or people shown as simple figures, when your policy calls for it.

Contact us

Tell us which cameras you have and what you want them to watch for.

See a sample pilot report

  • Headquarters
    ConductScience Inc.
    5250 Old Orchard Rd Suite 300
    Skokie, IL 60077
    +1 (847) 983-3672
  • Sales & Support
    info@conductscience.com
    Mon to Fri, 9 AM to 5 PM Eastern