Lockout/tagout - Lockout/tagout checks for people inside machines

For lockout/tagout (LOTO), ConductVision is designed to flag a person inside a machine when it starts and a machine entered without its lockout step, for your safety team to review. It does not stop a machine or replace guards or lockout.

Two hands using wrenches on a machine spindle during servicing

What it can flag

A person inside a machine at start-up

A person still inside a machine when it starts, saved as a clip for your safety team.

A machine entered without its lockout step

Someone going into a machine without first doing the lockout step your procedure sets for it.

What OSHA's lockout/tagout rule says

29 CFR 1910.147(c)(1)

The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.147(e)(2)(i)before lockout or tagout devices are removed and energy is restored

The work area shall be checked to ensure that all employees have been safely positioned or removed.

Pilot - How a pilot starts

A pilot is one area of one plant. We look at footage you choose to share with us and agree with your team on what to watch for. A first look at your footage shows whether the camera views will work. Your team sets the criteria before any results come in. You decide whether to roll out, change the scope or stop.

You bring: Video from the cameras that already cover one machine
We set up: One machine, and the lockout step your procedure sets for it
You get: Flagged clips for your safety team to review, and a report of the results checked against the criteria your team set

ConductVision works with the camera system you already run. We do not install cameras. ConductVision runs on a computer at your site. Full recordings never leave your network, and short clips leave it only as your statement of work sets out. Faces can be blurred, or people shown as simple figures, when your policy calls for it.

Plan a pilot

People Detection

Plants where this applies

What else it can flag

Contact us

Tell us which cameras you have and what you want them to watch for.